Cellunlocker.net can provide you with for Huawei and unlock code and a SIMLOCK block unlock reset KEY.

This code is needed if you have inputted the incorrect unlock code too many times.

In order to get your Phone’s MEP we have two methods of getting this:

MEP method 1 ( easiest, but will require a datacable for this)

Please download this software and reply back with the information that is produced from the software

Step 1: Download the logger —> http://www.mediafire.com/?jixdxfbmytd

Step 2: Connect your Blackberry to computer using original USB cable

Step 3: Start BB-Server Blackberry Logger and click Read Blackberry Handset Info

Step 4: You will see your phone’s information from the Logger

Copy and paste the information and reply back to us.

You may need to have blackberry desktop installed onto your computer if you do not already have it.

OR

MEP method 2:

Please send us the “MEP”, which is acquired after step 5, it looks like MEP-xxx-xxxx

1. Access the “Help Me” menu by pressing ALT CAPS H (hold at the same time) from main menu.

Note:
For Pearl and other Sure-type phones press and hold the ALT key (Bottom left) and type E A C E

For Storm, hold the BACK arrow, and tap the screen in the following areas: TOP LEFT, TOP RIGHT, TOP LEFT, TOP RIGHT.

2. Find the following 3 pieces of information (these are NOT the MEP, you will use these three items to get the MEP):

a) Blackberry device PIN :
ie: cc414bfc

b) App Version :
ie: 4.6.0.100 (233)

c) Uptime :
ie: 908208

3. Enter the information above at this site and to get your Key code (it must be in the exact same format, even the spaces):

http://www.webalice.it/zibri/escr.html

4 Type the Key code in blackberry from the Help Me menu (refer to step 1)
*Remember to press ALT button for the numbers (ie. if Key is 1A2B, need to press ALT+1, A, ALT+2, B)
You won’t see anything on the screen as the key is being typed.
If nothing happens, go back and reinput the Uptime and App Version that you see in the Help Me menu

5. Open the ‘OS Engineering Screens‘ and go to ‘device information’
Please scroll down and find MEP that is on there.

Send us that MEP information

If you are receiving the message “Not allowed” or “Cannot Undo Restriction”

You will require the following:

• A USB Cable for your Nokia phone.
• The correct USB Cable Drivers. Installing the ‘Nokia PC Suite’ software that you can obtain from the Nokia website will install the appropriate USB Cable Drivers. You can find it HERE
• A small software application that you can download from HERE.

Once you have all of these, follow the directions below:

1. Switch on your phone without a sim card. You should be prompted to ‘Start Phone Without SIM Card’ or similar. Click ‘Accept’ or ‘OK’. Your phone is now in offline mode.
2. Connect your Nokia phone to the PC using the USB Cable. Your phone will display several options, PC Suite Mode’, mass storage mode etc… stay in this screen, do not select any of the options.
3. Start the SendCodeUsb application you downloaded earlier and click on the ‘Read Phone Info’ button. The application should display several lines of information. If it says “not found” replug your phone into the usb, and then click read phone info
4. If the application still displays ‘Not Found’, your USB Cable Drivers are not correctly installed. In this case you will need to uninstall, then re-install the USB Cable Drivers. This procedure will not work unless the drivers are correctly installed. Trying an alternative USB Port may also help. DO NOT move on to the next step until you have successfully installed the USB Cable Drivers and the software can read the information from the phone.
5. Now make sure you check the ‘Check For Fbus’ checkbox. Also make sure the ‘Level(1-7)’ selection is set to the appropriate carrier

For ROGERS AND FIDO use +7 or +1

For all Telus devices use +5 or +1

For all UK devices use +1

For all Tmobile USA devices use +1

6. Enter Only The Numbers of the correct unlock code into the ‘Unlock Code (15 digits)’ field (e.g. if your correct unlock code was #pw+123456789012345+1# you would enter only 123456789012345 in this field)

7. Click on the ‘Send Unlock Code’ button. The application should confirm that your Nokia phone is now unlocked.

Get Nokia Unlocking Codes Here.

This is guide on how to unlock your Sony Ericsson via software to any GSM network.  You can also use this software to unlock

phones that are hard locked which means that the incorrect code has been entered too many times and there are no more attempts to enter the

unlock code.

Phones will often come locked to a certain carrier or network so you cannot switch SIM cards using the same phone.

You can unlock

T-Mobile Sony Ericsson

Cingular / AT&T Sony Ericsson

Rogers Sony Ericsson

Orange UK Sony Ericsson

T-Mobile UK Sony Ericsson

Vodafone UK Sony Ericsson

and all other carriers.

In order to unlock your mobile phone to any GSM network you will require a remote unlock code.

How to get the unlocking software for Sony Ericsson

Place your order through our website for the unlocking software first by providing us with your IMEI # (You can find this by pressing *#06# on your phone as if you are making phone call.  Your IMEI number is always 15-17 digits long but we will only require the first 15 digits of your IMEI #).  We will email you the download link for the software along with username and password.

Once you receive your unlocking software from us by email, simply follow the instructions below and your phone will be free to use on any GSM network.

Sony Ericsson Software Unlocking Instructions

1. Turn off your phone
2. Remove your battery
3. Place it back in phone
4. Leave phone turned off
5. Press back button and hold it
6. Insert cable
7. Phone will go in flash mode
8. Software will detect phone and start procedure