Cellunlocker.net is proud to announce we have Sony Ericsson Xperia software back up and running for most models. After receiving the software you can unlock your Sony Ericsson Xperia phone in minutes! You can the software here Sony Ericsson Xperia Unlocking Software

Supported Sony Ericsson Xperia models:

Xperia X8 (E15, E15a, E15i, X8a, X8i)

Xperia X10 mini pro (U20a, U20i)
Xperia X10 mini (E10, E10a, E10i)
Xperia X10 (X10, X10a, X10i)

Xperia Ray (ST18, ST18a, ST18i, SO-03C, DoCoMo SO-03C)

Xperia Pro (MK16, MK16a, MK16i)

Xperia PLAY (R800, R800a, R800at, R800i, R800x, Z1, SO-01D, DoCoMo SO-01D)

Xperia Neo V (MT11, MT11a, MT11i)
Xperia Neo (MT15, MT15a, MT15i)

Xperia Mini pro (SK17, SK17a, SK17i)
Xperia Mini (ST15)

Xperia Arc S (LT18, LT18a, LT18i)
Xperia Arc (LT15, LT15a, LT15i, SO-01C, DoCoMo SO-01C)

Xperia Active (ST17, ST17i)

Xperia Acro (SO-02C, DoCoMo SO-02C)

Live with Walkman (WT19, WT19a, WT19i)
W8 Walkman (E16, E16i)

If your model is not listed you can get Unlock it via Unlock Code through Sony Ericsson Manufacturer method, you can click HERE

This software requires your device’s data cable and a PC. Some models may require Tweezers (Don’t worry its 100% Safe and Guaranteed)

UNLOCK MY SONY ERICSSON XPERIA BY SOFTWARE NOW!

Xperia X10 Unlocking Software Guide:

Support Models:

* Xperia X10
* Xperia X10i
* Xperia X10a

Please make sure:

* Your X10 is not running ANDROID V1.6, it must be updated to at least V2.1
* You have not flashed custom firmware to your phone
* You must have internet connection

Supported Operating Systems

* Windows XP
* Windows Vista 32 bit
* Windows Vista 64 bit
* Windows 7 32 bit
* Windows 7 64 bit
* (No Mac OS right now)
*

STEP 1: Install the Drivers

Before you can unlock your phone you must install SEMC flash drivers & ADB drivers, this sounds complicated but is in fact a very simple process.

Make sure you have installed the Multi Unlock Client,then follow this procedure (see the video for further guidance)

1. Go to START > ALL PROGRAMS > MULTI UNLOCK CLIENT > X10 DRIVERS
2. Select the correct 32 bit or 64 bit shortcut folder for your Operating System
3. First run “SEMC Flash Driver Install”
4. Complete the install wizard that appears
5. Second run “ADB Driver Install”
6. Complete the install wizard that appears
7. Next we need to connect the X10 in Flash Mode (some times called boot mode)
8. Remove the battery for 10 seconds and replace
9. With the phone still powered off, Press & HOLD the “Back Button”
10. Still holding the Back Button connect the USB cable
11. Windows will now detect the new hardware and automatically install the drivers.
12. Once complete, remove the USB cable from the phone and power the phone on.
13. Next we will connect the phone with “USB Debugging” Enabled
14. On the phone go to “Settings”
15. Next go to “Applications”
16. Next go to “Development”
17. Now enable “USB Debugging”
18. Click “OK” to confirm enabling of USB Debugging
19. Now connect the USB cable
20. Windows will now detect the new hardware and automatically install the drivers.
21. Once complete you can proceed to unlock your X10

STEP 2: Unlocking your X10

Please follow this 1 step at a time.

First you must open the unlock client and enter your USERNAME and PASSWORD

1. Go to START > ALL PROGRAMS > MULTI UNLOCK CLIENT
2. If you are using WINDOWS VISTA or WINDOWS 7 right click on “Unlock Client” the software and select “Run as administrator”
3. Windows XP, double click “Unlock Client”
4. Under the settings tab, Enter your LOGIN/USER NAME and your PASSWORD
5. Click “Save Login Data”

Now we can proceed to Unlocking the X10

1. Now click on the “SE” tab of the software
2. Make sure that your phone is running a later version of ANDROID that 1.6 (tick the box to confirm on the Unlock Client) or ….
3. If you are unsure if your phone is running v2.1 or later, then connect the phone in USB Debugging Mode & click “Check Phone”
4. Ok, we now know we are running ANDROID 2.1 or above (if you are not then please upgrade your phone and start again)
5. Remove your phones battery for 10 seconds and replace
6. Press and HOLD the phones back button
7. While still holding the phones back button connect the USB cable.
8. The unlock client will now start the unlock process
9. When prompted by the UNLOCK CLIENT, remove the USB cable and power on the phone.
10. Make sure the phone is in USB Debugging Mode and connect the USB Cable again
11. The UNLOCK CLIENT will now complete the unlock

PHONE IS NOW UNLOCKED!

Sony Ericsson Xperia x10 / x10 mini Unlock software

You can get this software HERE

This is a tutorial and instructions on how you can unlock your xperia x10 and x10 mini INSTANTLY by using software.

This software will read your unlock code on your xperia x10 and x10 mini and unlock your phone so you can use it on any GSM carrier.

Simply download the xperia x10 and x10 mini software, and follow the instructions, its fast and easy.

Once you unlock your xperia x10 and x10 mini you can use any GSM simcard.

Once you receive your software follow the instructions in the video below:

A summery can be found here as well

1. Go the link that was emailed by us and download the program.

2. Extract the program to your desktop.

3. Plug in your Xperia x10 into your computer.

4. Open the driver folder, and run the “ggsetup” program.

5. Unplug phone and take out battery.

6. Go back to main folder, and run the “qUnlockTool.exe” program.

7. Put battery back into the phone, and hold down the back button on your phone (keep holding back button)

8. Click the “unlock” button on program

9. Plug in the phone to your computer, wait a minute.

PHONE WILL DISPLAY UNLOCKED!

This software will allow you unlock

Cingular at&t xperia x10 / x10 mini

Rogers x10 / x10 mini

Docomo xperia x10 / x10 mini

Orange Uk xperia x10 / x10 mini

Tmobile Uk xperia x10 / x10 mini

and all other carriers!

This is guide on how to unlock your Sony Ericsson via software to any GSM network.  You can also use this software to unlock

phones that are hard locked which means that the incorrect code has been entered too many times and there are no more attempts to enter the

unlock code.

Phones will often come locked to a certain carrier or network so you cannot switch SIM cards using the same phone.

You can unlock

T-Mobile Sony Ericsson

Cingular / AT&T Sony Ericsson

Rogers Sony Ericsson

Orange UK Sony Ericsson

T-Mobile UK Sony Ericsson

Vodafone UK Sony Ericsson

and all other carriers.

In order to unlock your mobile phone to any GSM network you will require a remote unlock code.

How to get the unlocking software for Sony Ericsson

Place your order through our website for the unlocking software first by providing us with your IMEI # (You can find this by pressing *#06# on your phone as if you are making phone call.  Your IMEI number is always 15-17 digits long but we will only require the first 15 digits of your IMEI #).  We will email you the download link for the software along with username and password.

Once you receive your unlocking software from us by email, simply follow the instructions below and your phone will be free to use on any GSM network.

Sony Ericsson Software Unlocking Instructions

1. Turn off your phone
2. Remove your battery
3. Place it back in phone
4. Leave phone turned off
5. Press back button and hold it
6. Insert cable
7. Phone will go in flash mode
8. Software will detect phone and start procedure

This is guide on how to unlock your Sony Ericsson Xperia X10 to any GSM network.

Phones will often come locked to a certain carrier or network so you cannot switch SIM cards using the same phone.

You can unlock

T-Mobile Sony Ericsson Xperia X10

Rogers Sony Ericsson Xperia X10

Orange UK Sony Ericsson Xperia X10

T-Mobile UK Sony Ericsson Xperia X10

Vodafone UK Sony Ericsson Xperia X10

and all other carriers.

In order to unlock your mobile phone to any GSM network you will require a remote unlock code.

How to get an unlock code for Sony Ericsson Xperia X10

Do a code look up to find out if your IMEI number is found.  We can 99% percent of the time help you free your phone.

You can get the unlock code from HERE

In order to unlock your phone, we require your IMEI number.  You can find this by pressing *#06# on your phone as if you are making phone call.

Your IMEI number is always 15-17 digits long.

Once you receive your Unlock Code from us by email, simply follow the instructions below and your phone will be free to use on any GSM network.

Sony Ericsson Xperia X10 Unlocking Instructions

1 – Switch ON the phone with a not allowed SIM Card
2 – Phone will ask “SIM Network Unlock Code”
3 – Enter code