Upgrading the GALAXY S6 Edge SM-G925T to Allow Unlock
Samsung Galaxy S6 EDGE (SM-G925T) Device T-mobile to Canadian Firmware Upgrade
Disclaimer:
Please note: This method has been proven to work because it uses Samsung’s Official programs and the Official stock Canadian provided Images. As with any Official carrier or manufacturer firmware flashing this must be done at Your Own Discretion. The instructions are outlined CLEARLY and you must follow the instructions exactly. If any issues arise we cannot take responsibility for any issues. If you do not want to proceed, unfortunately we are unable to provide refunds as stated on our website before ordering. Please contact us for more information. You MUST perform these instructions and make sure the phone prompts with a NON accepted sim before you order or No Refunds!
What you will need:
1. Samsung KIES
2. Samsung ODIN3 v3.09
Download here
3. Factory Firmware file
Download here:
Galaxy S6 EDGE Unlockable firmware: CLICK HERE
4. Your Galaxy S6 Device EDGE (SM-G925T)
5. USB Cable
6. Windows 7, 8, 8.1 or later PC computer
7. OPTIONAL: if your ZIP program does not support .7z Files for your factory image file you will need to download and install this free program developed by ALTOOLS INC
Download here: alzip This is a recommended unzipping tool.
8. We recommend that you back up any crucial data as data will be wiped
INSTRUCTIONS:
1. Download each file provided above
2. Install the downloaded Samsung Kies
3. Unzip the downloaded files and place Samsung ODIN files and your Factory image file in a place you can easily find (IE. Desktop)
Tip: If you already have a ZIP program you can simply double click the ZIP file downloaded and it will automatically open, drag and drop every file inside the window to where ever you wish.
Tip2: You MUST unzip your Factory Image files from the .7z file downloaded, you MUST end up with a file ending with .TAR or .Tar.MD5
4. Restart your computer at this point
5. Open Samsung ODIN v3.09 as ADMINISTRATOR (right click > run as administrator)
Tip: DO NOT CHECK OR UN-CHECK OR change ANY BOXES IN ODIN PROGRAM
6. Put your phone into download mode
How-to: Turn your phone off completely. Then Hold Volume Down + Home + Power all at the same time, When the phone turns on let go of the power button but keep holding onto the Volume down and Home buttons
You are now in Download mode, simply follow the instructions to accept and get into download mode. (Volume up to accept)
Press Volume up to get into download mode
7. Connect your device to your computer with the USB cable
Tip: If ODIN does not detect your device as described below, please turn off ODIN and open it again.
8. If ODIN detects your Device you should see the image below
Tip: It may not Say 0:[COM7] exactly, but as long as you get something in there (For example, 0:[COM2]) you are good to go
9. Click the big PDA button in the Samsung Odin window and select the Downloaded Factory IMAGE file G920T1UVU1AOCH_G920T1TMB1AOCH_TMB_HOME.tar.md5
Tip: the file must be in .TAR or .TAR.MD5 format for the program to detect
10 Once Odin loads the large downloaded file please click START at the bottom
11. Wait until ODIN flashes the new firmware image into your device
Important Tip: DO NOT DISCONNECT THE DEVICE DURING FLASHING!!!
12. You should see a green PASS! After 5 or 10 minutes
Tip: The Phone will reboot once automatically
13. Use the Defreeze Code and then the Network Code afterwards
FAQ:
1. I am stuck on the SAMSUNG BOOT LOGO! What do I do?
Answer:- Do not worry, your phone is not broken. Simply follow the instructions below:
a. Wait at least 5 minutes to make sure you are stuck on the logo screen
b. Pull the battery out and wait 30 seconds, then put the battery back in
c. Turn the phone on by: HOLDING VOLUME UP + HOME + POWER you will soon see the RECOVERY page
Tip: when the phone turns on let go of the power button ONLY, when you see the recovery let go of everything
d. Scroll down to WIPE factory user data reset and select it, when prompted scroll to YES and select it to do a factory wiping
e. Scroll down to WIPE CACHE PARTITION and select it, when prompted scroll to YES and select it to do a wipe on cache
Tip: Use the volume rockers to navigate and the power button to Select your option
f. Reboot the phone, you should load properly now
